Description
PacketShaper 7500
Product Specifications
Dimensions | Standard 19-inch rack mount |
Height: 3.50 in. (8.89 cm) | |
Width:17.35 in. (44.07 cm) | |
Depth: 16 in. (40.64 cm) | |
Weight | 20.48 lbs. (9.29 kg) |
Network Ports per NIC | Two gigabit Ethernet ports: 1000Base-T, 100Base-T, or 10Base-T |
Expansion Slots | Two (each slot can accommodate one LAN Expansion Module) |
Management Port | One gigabit Ethernet port |
Serial Port | RS-232 (AT-compatible) serial port with male DB-9
connector |
LCD Panel | Yes. See LCD Panel Messages |
USB Ports | Two (reserved for future use) |
Status LED | If all of the following conditions are true, the LED is green, otherwise it is amber:
|
Fault LED | Illuminated when in safe or corrupted mode |
Power LED | Illuminated when unit is plugged into an active power outlet and the unit is turned on |
Link LED | Illuminated when the network cable is properly connected on both ends |
Tx/Rx LED | Flickers when the unit is transmitting and receiving data |
Speed LED | Indicates link speed:
|
Electrical Data* | Power Supply Rating: 100/240 VAC, 50/60 Hz, 2.5A
DC Output Power: 59 watts AC Input Power: 74 wattsInput Current:
*Measured at the maximum configuration (2 LEMs, 2 power supplies). |
Heat Dissipation | 253 BTU/hour |
Noise Level | 60 dB |
Environmental (Operating) |
Temperature: 32° F to 104° F (0° C to 40° C)
Relative humidity: 0% to 95% non-condensing Altitude: 0 to 10,000 ft. operating |
Environmental (Storage) |
Temperature: -13 ° F to 131 °F (-25° C to 55° C)
Humidity: 5% to 95% Air pressure: 70 to 106 kPa |
Managed Link Speed | Multiple configurations are offered; supports links up to 200 Mbps full duplex. Software configuration determines maximum shaping capacity. |
RoHS Compliant | Yes |
Minimum PacketWise Version | PacketWise 7.3 and higher |
Availability (MTBF) | See PacketShaper Platform Availability |