Broadcom Symmantec Blue Coat PacketShaper 10000 nolimit

$5,500.00

Manufacturer: Broadcom/Blue Coat

Specification: Packetshaper Datasheet

Part number: PS10000G-L001G-2000-SX

Condition: Refurbished

Warranty: 12 months

Units in stock: 

Ships within 24 Hours

Description:
  • Packeteer PacketShaper 10000, with licenses include nolimit Shaping  ( 1Gbps constraint due to hardware limit).
  • PacketWise v9.26
  • 2-port Twisted pair GigE
  • 2-port Fiber GigE SX w/LC connector
  • Dual 110V-240VAC Power Supplies.
Category:

Description

PacketShaper 10000
Product Specifications

 

Dimensions Standard 19-inch rack mount
Height: 3.50 in. (8.89 cm)
Hủy: 17.31 in. (43.97 cm)
Depth: 20.25 in. (51.43 cm) including handles
Weight 33 lbs. (14.97 kg)
Network Ports per NIC Two gigabit Ethernet ports: 1000Base-T, 100Base-T, or 10Base-TorTwo gigabit fiber-optic ports with small form-factor pluggable (SFP) transceivers: 1000Base-SX or 1000Base-LX
Expansion Slots Two (each slot can accommodate one LAN Expansion Module).
Management Port NA
Serial Port RS-232 (AT-compatible) serial port with male DB-9 connector
LCD Panel Yes. See  LCD Panel Messages
LED status Nếu  tất  cả các giá trị sau đó là đúng, LED is green, otherwise it is amber:

  • all links are up
  • shaping is on
  • xác định địa chỉ Router của địa chỉ này được phát hiện bởi gói tin máy hay địa chỉ Router Địa chỉ không thành  công
LED Fault Illuminated when in safe or corrupted mode
Power LED Illuminated when unit is plugged into an active power outlet and the unit is turned on
Link LED Illuminated when the cable network is properly connected on both ends
Tx / Rx LED Flickers when the unit is transmitting and receiving data
Speed ​​LED
(copper Ethernet)
Indicates link speed:

  • amber = 1 Gbps
  • green = 100 Mbps
  • off = 10 Mbps
SX / LX LED
(fiber-optic)
Indicates types of fiber optic transceivers installed in the port:

  • green = SX
  • yellow = LX
Electrical Data * PacketShaper 10000 Revision G and higher:Power Supply Rating: 100/240 VAC, 50/60 Hz, 8A
DC Power Output: 265 watts
AC Input Power: 277 wattsInput Current:

  • 3.16 A at 90 VAC / 60 Hz
  • 2.41 A at 120 VAC / 60 Hz
  • 1.65 A at 180 VAC / 60 Hz
  • 1.34 A at 240 VAC / 60 Hz

PacketShaper 10000 Series:Power Supply Rating: 100/240 VAC, 50/60 Hz, 6A
DC Output Power: 239 watts
AC Input Power: 247 wattsInput Current:

  • 2.80 A at 90 VAC / 60 Hz
  • 2.08 A at 120 VAC / 60 Hz
  • 1.51 A at 180 VAC / 60 Hz
  • 1.23 A at 240 VAC / 60 Hz

* Measured at the maximum configuration (2 LEMs, 2 power supplies).

Heat Dissipation PacketShaper 10000 Revision G and higher: 946 BTU / hourPacketShaper 10000 Series: 843 BTU / hour
Noise Level 65 dB
Environmental
(Operating)
Temperature: 32 ° F to 104 ° F (0 ° C to 40 ° C) ambient
Relative humidity: 0% to 95% non-condensing
Altitude: 0 to 10,000 ft. operating
Environmental
(Storage)
Temperature: -13 ° F to 131 ° F (-25 ° C to 55 ° C)
Humidity: 5% to 95%
Air Pressure: 70 to 106 kPa
Managed Link Speed Multiple configurations are offered; hỗ trợ liên kết lên tới 1 Gbps full duplex. Software configuration determines maximum shaping capacity.
RoHS Compliant Rev. G and higher
Availability (MTBF) See  PacketShaper Platform Availability

Note:  Specifications are subject to change without notice.